RG 15
Rough coat. GP-CSIV-W0 according to the norm UNI EN 998-1.
Description:Dry premix based on calcium-silicate inerts, special binders and additives aimed at improving workability and grip.
RG 15 is used as rough cast for interior and exterior surfaces like brick, block, etc. before the application of lime-based plasters and hydraulic binder. It is used in restoration work to homogenize the areas to be subsequently plastered with plasters like our own FG 12, IG 14, and so on. The application must be performed on surfaces free of dust, efflorescence, oils, fats.
RG 15 should not be applied to gypsum, inconsistent and brittle surfaces and on concrete surfaces, where we recommend the use of our RG 12.
The application must be made in a completely covering manner.
RG 15 should not be applied to gypsum, inconsistent and brittle surfaces and on concrete surfaces, where we recommend the use of our RG 12.
The application must be made in a completely covering manner.
Specific weight determined in free fall
1550
kg/m³
Maximum diameter
2
mm
Water in the mix (percentage)
circa 20
%
Consumption per 1 cm layer
7-8
kg/m²
Water vapor permeability μ
9
Thermal conductivity λ
0,42
W/mK
Data sheet
EC table
DoP
Safety Data Sheet