SIL4 INTO - SILIKATPUTZ K 1,2-1,5-2-3 mm

SIL4 INTO is a finish paste with thick plaster effect, in various types of grain size, according to DIN 18363, Section 2.4.6., based on waterproofed potassium silicate, inorganic pigments resistant to light and UV radiation, and controlled and selected mineral fillers. It has excellent resistance to weathering, a low retention of dirt and an excellent adhesion to the substrate, without generating phenomena like peeling and detachment. The product contains potassium silicate soluble in water which, following the application on the surface, reacts with the carbon dioxide from the air and with the calcium salts present in the layer of plaster, giving birth to calcium silicate, mineral salt that possesses high consolidation and adhesive characteristics and gives the layer of applied product the appearance and properties of typical building materials. Moreover, the potassium silicate gives the product a high permeability to water vapor, while the siloxane additives allow the finish to have a low water absorption. The product is easy to apply due to itsexcellent workability and finishing.
ETA certified product for thermal insulation systems.
       

All these features make SIL4 INTO suitable for application inside and outside, on background mineral plasters based on hydraulic lime-binder, premixed and traditional, thermal insulation systems like thermo-plasters and coatings, concrete conglomerates and cementous skim plasters. In particular, the product appears to be a special, in-depth coating for the protection and decoration of historic facades, new buildings and restoration of plaster where a high water vapor diffusion and a low water absorption is needed.
SIL4 INTO may be tinted with the arteMURI tintometric system.